Element of dialog
|
Description
|
Buffer Name
|
Here you can type in a name for the buffer or pick it from the history list. By default the first opened buffer gets the name "Buffer #0". Then you can open the "Buffer #1", etc. or give the buffer any name you wish.
|
Size of sub-layer 'Code'
|
Here you can assign a size of the 'Code' layer from the drop-down menu - from 128KB to 32MB.
|
Fill sub-layer 'Code' with data:
|
The program fills the buffer sub-layers with some default information, usually by the 'FF's or zeros. By checking these boxes you specify when the layer 'Code' should be filled with the default information - before loading the file or right after the device type has been chosen.
|
Data to fill sub-layer with:
|
These two toggled radio buttons define if the sub-layer 'Code' will be filled with some default information, specific for the selected device, or by the custom bit pattern.
|
Shrink buffer size when device is selected
|
The buffer size usually exceeds the target device 'Code' size. By checking this box you downsize the buffer to match the target device and to free some computer memory.
|