How to check if a device is blank

1.

Select the target device type, pressed the button Select Device in the Main toolbar or select the command Main menu > Configure > Select device.
 

2.

Insert a device of the selected type into the programmer socket or into the adapter socket.
 

3.

a) Click the Check button on the main toolbar or
b) Double click on the Blank check function line in the Function list of the Program Manager window or
c) Select the Blank check function line in the Function list of the Program Manager window and click the Execute button or

d) Select the Main menu > Commands and click on the Blank check line
 
then wait for the message Checking … OK in the Program Manager window, or for the warning message if the device is not blank