Hardware characteristics of ChipProg-G41

1.Enclosed in a durable steel case to be used in an industrial environment.

2.The tool gets power from a standard outlet 110-240V, 50-60 Hz.

3.Each programming site based on a single ChipProg-481 programmer has a 48-pin ZIF socket with a lever that enables the insertion and clamping of any DIP-packed devices with the package width from 300 to 600 mil (7.62 to 15.24 mm) and with the number of leads up to 48.

4.Adapters for programming devices in the SDIP, PLCC, SOIC, SOP, PSOP, TSOP, TSOPII, TSSOP, QFP, TQFP, VQFP, QFN, SON, BGA, CSP and other packages are available from Phyton and many third parties.

5.Single ChipProg-481 programmers inside of the tool enclosure are connected to an embedded USB 2.0 hub

6.Each programming site is built on the base of a very fast and powerful 32-bit embedded microcontroller and FPGA. These resources allow adding new targets to the device list by a simple software update.