Major features of ChipProg-G41

1.Based on four ChipProg-481 programming modules enclosed in a metal case and connected to a PC via an embedded USB hub.

2.Allows independent and concurrent programming of up to four devices of the same type.

3.A few ChipProg-G41 units can be cascaded to allow programming on 8-, 12-, 16- and more sites concurrently.

4.48 pin ZIF sockets allow insertion of any DIP-packed devices with the package width from 300 to 600 mil (7.62 to 15.24 mm) and the number of leads up to 48 without additional adapters.

5.Links to a PC USB 2.0 compatible port via one link cable.

6.Provides fast programming; for example, completely writes a 1Gb NAND K9F1G08U0A flash device in 22 sec!

7.Can program target devices in its socket as well as devices installed in the equipment (ISP mode).

8.Each programming site has a 'Start' button for fast manual launch of any single operation or a batch of operations.

9.Each programming site has three LEDs for displaying the programming status (“Good”, “Busy”, “Error”).