Software features of ChipProg-ISP

1.The ChipProgUSB software works under control of Windows XP, 7 (32- and 64-bit), 8.

2.Several methods of control are available: friendly and intuitive Graphic User Interface (GUI), Command Line control, Remote Control via the Application Control Interface (the DLL), on-the-fly control are included into the standard ChipProgUSB package.

3.Includes a set of basic commands: Blank Check, Erase, Read, Write, Verify, Lock, Set Configuration Bits, Data Memory Support, etc., executed by a single mouse click.

4.Enables presetting a batch of the commands above executed one after one either by a manual start or by a mouse click or automatically upon the device insertion into the programming socket.

5.Allows serialization of the programming devices with auto incrementing the device numbers and storing a serialization log (in the Auto Programming mode only).

6.The program can calculate checksums of the selected data array and then write the checksum into a specified memory location of the target device  (in the Auto Programming mode only). Several methods of the checksum calculation can be used.

7.The program allows writing a unique signature into a specified memory location of the target device for the device identification  (in the Auto Programming mode only).

8.The project support speeds up and simplifies switching between different programming tasks.

9.The software allows pre-programming a particular operation (or a chain of operations), which is supposed to be automatically triggered when the programmer hardware detects insertion of the target device into the programming socket.

10. An unlimited number of memory buffers can be opened in the main ChipProgUSB window.

11. The software supports a multiple programming mode for concurrent programming of the same type of target devices on the same type of programmers connected to one computer. A number of single device programmers connected to the programming cluster does not slow down the programming speed.

12. The software includes a full-scale binary editor allowing manual modification of the data in buffers as well as such helpful functions as Search and Replace, Fill, Compare, Copy, Invert, Calculate Checksum, and OR, AND, XOR logical operations on the blocks of data.

13. Loading and saving files in several standard and proprietary formats: Binary, Standard Extended Intel HEX, Motorola S-record, POF, JEDEC, PRG, Holtek OTP, ASCII HEC, ASCII OCTAL, Angstrem SAV. Special non-standard formats can be added upon request.

14. The software is featured by a script language and a mechanism of handling the script scenarios for automation of the routine operations and chip replications.