Command
|
Description
|
Blank Check
|
This command invokes the procedure of checking the target device before programming to make sure that it is really blank. Programming of some memory devices does not require erasing them before re-programming. For such devices the Blank Check command is blocked and it is shown grayed out on the screen.
|
Program
|
This command invokes the procedure of programming the target device, e.g. writes the contents of the buffer into the target device’s cells.
|
Verify
|
This command invokes the procedure of comparing the information taken from the target device with the corresponding information in the buffer.
|
Read
|
This command invokes the procedure of reading the content of the target device’s cells into an active buffer.
|
Erase
|
This command invokes the procedure of erasing the target device. Some memory devices cannot be electrically erased. In this case the Erase command is blocked and is grayed out on the screen
|
Auto Programming
|
This command invokes the procedure of AutoProgramming.
|
Local menu
|
Opens the local menu of active window.
|
Calculator
|
Opens the Calculator dialog, which performs calculator functions.
|