Operations with Simplified User Interface

To launch the ChipProgUSB with the Simplified User Interface (or in the Simplified Mode) in the Command line mode use the key /Y <configuration name>. The key /Y and the <configuration name> should not be separated by a space. If the <configuration name> includes spaces the name should be quoted. For example:

C:\Program Files\ChipProgUSB\5_22_00\UprogNT2.exe /Y"DS89C430 - Release" ,

where the DS89C430 - Release is the configuration name.

When launched in the Simplified Mode the ChipProgUSB displays only the SUI window. The main ChipProgUSB window remains invisible until an error occurs. When a programming operation fails, the programmer behaves in accordance with the settings that control errors. These settings are available through the menu Configure > Preferences. If the box Terminate device operation on error and do not display error message... in the Preference dialog is unchecked (default setting) the ChipProgUSB will issue an error message and prompt to either ignore the error and resume operation or to terminate it. If this box is checked, any error will cause the programming session to come to a complete stopp., The error message will not be issued.