CPI2-GDMR – Relay Demultiplexer

$625.00 each
Discount information


CPI2-GDMR – Relay Demultiplexer

This relay demultiplexer is intended for a) doubling the number of CPI2-Gx’ channels for sequential device programming and b) providing galvanic isolation of the target panel from the programmer. The CPI2-GDMR unit can be docked to either A or B programmer’s channel by a 150-pin DIN connector labeled as “CPI2-Gx Device Programmer”. Two 150-pin DIN connectors labeled as “Target 1” and “Target 2” on an opposite side of the unit enable connecting to the targets. On both short sides the demultiplexer unit has a pair of power connectors (12 to 18V / 1A) and a pair of header CTRL that enable connecting control signals from ATE. See the CPI2-GDMR datasheet for more information.