For better integration CPI2-Gx gang device programmers with automated test equipment (ATE), they can be optionally equipped with relay modules and signal splitter boards. See the pictures that display various combinations of Phyton relay modules and signal splitter boards docked to CPI2-Gx programmers.
| Part Number | Short Description | Price (USD) | Add to cart |
|---|---|---|---|
| CPI2-GASB-7/20 | Signal splitter board 1-to-7x 20-pin connectors for channel A | $180.00 (-% info)Discount informationVolume discounts:
Discount will be applied at the checkout. |   |
| CPI2-GBSB-7/20 | Signal splitter board 1-to-7x 20-pin connectors for channel B | $180.00 (-% info)Discount informationVolume discounts:
Discount will be applied at the checkout. | |
| CPI2-GASB-14/20 | Signal splitter board 1-to-14x 20-pin connectors for channel A | $280.00 (-% info)Discount informationVolume discounts:
Discount will be applied at the checkout. | |
| CPI2-GBSB-14/20 | Signal splitter board 1-to-14x 20-pin connectors for channel B | $280.00 (-% info)Discount informationVolume discounts:
Discount will be applied at the checkout. | |
| CPI2-GCSB-7/10 | Control splitter board 1-to-7x 10-pin connectors | $180.00 (-% info)Discount informationVolume discounts:
Discount will be applied at the checkout. | |
Signal Splitter Boards for CPI2-Gx Device Programmers
CPI2-Gx device programmers have a pair of 150-pin DIN connectors for outputting ISP signals to target boards. These connectors, marked as Channel A and Channel B, are located on long side of the programmer unit. To simplify connection to the target by means of simple, easy-to-buy, 20-wire ribbon cables, Phyton offers signal splitter boards which can be docked either directly to CPI2-Gx device programmers or through CPI2-GTRB and CPI2-GDMR relay modules.
The pictures below display examples of connecting signal splitter boards. See more pictures.
|
|
| CPI2-GASB-7/20 and CPI2-GBSB-7/20 splitter boards connected to the channels A and B of a CPI2-Gx programmer | A CPI2-GASB-14/20 splitter board connected to the CPI2-GDMR relay demultiplexer docked to the A channel |
CPI2-GASB-7/20 signal splitter board
|
$180.00 each Datasheet |
|
The CPI2-GASB-7/20 board splits ISP signals on the CPI2-Gx programmer’s channel A c to 7x 20-pin male-type connectors. It docks either to a CPI2-Gx programmer’s channel A DIN connector or to the CPI2-GTRB relay barrier unit connected to the A channel. Cables are not included in the board kit. See the datasheet.
CPI2-GBSB-7/20 signal splitter board
|
$180.00 each Datasheet |
|
The CPI2-GBSB-7/20 board splits ISP signals on the CPI2-Gx programmer’s channel B c to 7x 20-pin male-type connectors. It docks either to a CPI2-Gx programmer’s channel B DIN connector or to the CPI2-GTRB relay barrier unit connected to the B channel. Cables are not included in the board kit. See the datasheet.
CPI2-GASB-14/20 signal splitter board
|
$280.00 each Datasheet |
|
This board is used in a combination with CPI2-GDMR relay demultiplexers, only. A CPI2-GDMR unit has a pair of output connectors: TARGET 1 and TARGET 2 toggling by the ATE signal. So, the ISP signals split in two groups of 20-pin connectors – seven connectors in each group: 1 and 2.
If the demultiplexer connects to the A channel, the CPI2-GASB-14/20 splitter board should be used. See the datasheet.
CPI2-GBSB-14/20 signal splitter board
|
$280.00 each Datasheet |
|
This board is used in a combination with CPI2-GDMR relay demultiplexers, only. A CPI2-GDMR unit has a pair of output connectors: TARGET 1 and TARGET 2 toggling by the ATE signal. So, the ISP signals split in two groups of 20-pin connectors – seven connectors in each group: 1 and 2.
If the demultiplexer connects to the B channel, the CPI2-GBSB-14/20 splitter board should be used. See the datasheet.
CPI2-GCSB-7/10 signal splitter board
|
$180.00 each Datasheet |
|
The CPI2-GCSB-7/10 board splits incoming and outgoing control signals on the CPI2-Gx programmer’s connector CONTROL. It has a 48-pin DIN connector that plugs into the connector CONTROL situated on the face of the CPI2-Gx gang device programmer. Input signals (Job Select, Standalone select and Start) and output signals (Busy, Good and Error status) are grouped by sites and populated to 10-pin male header connectors compatible with standard 10-wire ribbon cables with mounted female BH headers. See the datasheet.